Showing 37–72 of 124 results

HolyBro Micro M10 GPS

3,199.00
These Micro GPS uses multi-constellation GNSS powered by u-blox M10, a concurrent GNSS receiver which can receive and track multiple

Holybro Pixhawk 6X Autopilot Flight Controller Standard Set

37,999.00
  1. FMU Processor: STM32H753
  2. IO Processor: STM32F103
  3. Accel/Gyro: ICM-20649 or BMI088
  4. Accel/Gyro: ICM-42688-P
  5. Accel/Gyro: ICM-42670-P
  6. Mag: BMM150
  7. Barometer: 2x BMP388

Holybro Tekko32 F4 4in1 50A ESC

7,199.00
  1. Continuous Current 50A x4
  2. Burst Current 60A x4
  3. Supports 4-6S battery
  4. Supports DShot 150/300/600/1200 & MultiShot/OneShot/Proshot/PWM etc.
  5. ESC telemetry Supported

HolyBro Tekko32 F4 4in1 Mini 50A ESC

6,799.00
Features: All new High-quality MOSFETs with low internal resistance & heat generation, and individual metal heatsink New and faster F4 MCU @ 150Mhz (compared to F3 @108Mhz & F0 @48Mhz) Separate drive & control circuit, reducing the electrical interference to the control circuit Specification: Continuous Current: 50A x4

Holybro Tekko32 F4 Metal 4in1 65A ESC

9,399.00
F4 MCU @150Mhz / Metal-Cased MOSFET / PWM output up to 96K / 4~6S / BLHELI32 The all new Tekko32

iFlight Anti Spark Filter

1,499.00
Plugging in a battery can create a loud spark at the connector which is caused by the high battery current

iFlight BLITZ ATF435 Flight Controller

3,699.00
Specifications MCU: AT32F435CGU7 Gyro: ICM42688 Barometer: DPS310 OSD Chip: AT7456E Flash: 32MB (Blackbox flash) UARTS: 6 Motor outputs: 4x (SH1.0

iFlight BLITZ ATF435 Stack (E55S 4-IN-1 ESC)

7,499.00
FC Specifications MCU: AT32F435CGU7 Gyro: ICM42688 Barometer: DPS310 OSD Chip: AT7456E Flash: 32MB (Blackbox flash) UARTS: 6 Motor outputs: 4x

iFlight BLITZ BEC Module

399.00
  The iFlight BLITZ BEC features step-down switch mode high-efficiency synchronous rectification and the ability to step down from an input voltage of up to 35V to a low output stable voltage

iFlight BLITZ D25 HD F7 AIO W/ OSD

13,499.00
This Blitz F745 HD 20A AIO with OSD board is only for Iflight Defender 25. This is the new generation F7 AIO equipped with an ICM42688P gyro,

iFlight BLITZ D25 HD F7 AIO w/o OSD

12,999.00
Compatibility 1. This AIO without OSD Chip, it made for Defender 25 HD VTX only. 2. Bigger size than the

iFlight BLITZ E45S 45A 4-IN-1 ESC

5,999.00
Specifications Target: Q-H-25 16.7(BlheliS) / Bluejay Q-H-50 (Bluejay) Supports: DShot150/300/600/MultiShot/ OneShot etc. Mounting Holes: 30.5*30.5mm/Φ4mm Supports 2-6S lipo input Telemetry

iFlight BLITZ E55 4-IN-1 2-6S ESC

8,999.00
PRODUCT DESCRIPTION Specification: – Mounting Holes: 30.5*30.5mm/Φ4mm – Weight: 15.3g – Supports 2-6S lipo input – MCU:G071 – Constant: 55 Amps  –

iFlight BLITZ E55R 4-IN-1 ESC

7,499.00
Specifications Product Name: BLITZ E55R 4-IN-1 ESC (G2) Input Voltage: 2-6S Max. Continuous Current: 55A Max. Burst Current: 65A MCU:

iFlight Blitz E80 80A 2-8S BLHeli_32 Single ESC

5,999.00
About this product The iFlight Blitz E80 80A 2-8S BLHeli_32 Single ESC was designed to give your motors smooth power with great

iFlight BLITZ E80 Pro 4-IN-1 ESC

22,499.00
Description The MOSFET used by BLITZ E80 is PSMN1R0-40YLD, which can withstand a continuous current of 80A at 25°C, with

iFlight BLITZ F7 Pro Flight Controller 35×35

8,999.00
PRODUCT DESCRIPTION Top Features of iFlight Blitz F7 Pro: – Improved circuit design, better components, and lower electrical noise! –

iFlight BLITZ F7 Stack (E55 4-IN-1 ESC)

13,499.00
Features Improved circuit design, better components and lower electrical noise! DJI HD VTX Connector (Plug-and-Play / No soldering required) FC

iFlight BLITZ F7 Stack (E55S 4-IN-1ESC)

9,749.00
FC Features Improved circuit design, better components and lower electrical noise! DJI HD VTX Connector (Plug-and-Play / No soldering required)

iFlight BLITZ F7 V1.2 Flight Controller

5,399.00
Features Improved circuit design, better components and lower electrical noise! DJI HD VTX Connector (Plug-and-Play / No soldering required) FC

iFlight BLITZ F745 Flight Controller

6,299.00
Features Improved circuit design, better components and lower electrical noise! DJI HD VTX Connector (Plug-and-Play / No soldering required) FC

iFlight BLITZ M10 GPS V2

4,199.00
Description The newly upgraded BLITZ M10 GPS V2 has arrived, offering faster and more stable satellite search. This advancement in

iFlight BLITZ Mini ATF435 Flight Controller

3,399.00
Specifications MCU: AT32F435RGT7 Gyro: BMI270 Barometer: DPS310 OSD Chip: AT7456E Flash: 16MB (Blackbox flash) UARTS: 6 Motor outputs: 4x (SH1.0

iFlight BLITZ Mini ATF435 Stack (E55S Mini 4-IN-1 ESC)

7,499.00
FC Specifications MCU: AT32F435RGT7 Gyro: BMI270 Barometer: DPS310 OSD Chip: AT7456E Flash: 16MB (Blackbox flash) UARTS: 6 Motor outputs: 4x

iFlight BLITZ Mini E55S 4-IN-1 ESC V1.1

4,299.00
Specifications Mounting Holes: 20*20mm/Φ4mm Weight: 11.3g Supports 2-6S lipo input MCU: BB21 Constant: 55 Amps Burst: 65 Amps Telemetry Output:

iFlight BLITZ Mini F4 Flight Controller

5,399.00
PRODUCT DESCRIPTION Top Features: – Improved circuit design, better components and lower electrical noise! – DJI HD VTX Connector (Plug-and-Play

iFlight BLITZ Mini F7 V1.1 Flight Controller

6,199.00
PRODUCT DESCRIPTION Top Features: – Improved circuit design, better components and lower electrical noise! – DJI HD VTX Connector (Plug-and-Play

iFlight BLITZ Mini F745 Flight Controller

5,999.00
Features Improved circuit design, better components, and lower electrical noise! DJI HD VTX Connector (Plug-and-Play / No soldering required) FC

iFlight BLITZ SPLIT GPS

2,999.00
Description GPS specially designed for Defender25. Features UBLOX M10 chip Built-in farad capacitor for faster hot start Onboard LNA (Low

iFlight BLITZ Whoop F411 1S AIO – w/Rx

6,499.00
Features SUPPORT BLHELISUITE PROGRAMMABLE BUILT IN 2.4G CC2500 RECEIVER 5A CONTINUOUS CURRENT SUPER LIGHT ONLY 4.8G MCU:STM32F411 POWER SUPPLY: 1S

iFlight Defender 16/20 F411 AIO

6,599.00
Description This is a new generation F411 AIO designed for Defender 16/20. A future proof all-in-one FC to step up

iFlight Defender 25 LED Strip

499.00
Description Light up your Defender 25! These LED strips can be installed in your Defender25. The Connectors are already included

iFlight LC Filter Module 2-3A for FPV Noise Reduction Filtering

299.00
This compact and effective LC type filter uses large value inductor and capacitor components,  designed to clean a noisy DC power supply which often causes lines in wireless video images.

JIYI K++ V2 Flight Controller for Agricultural Drones/UAVs

35,999.00
This Jiyi K++ V2 Flight Controller Kit is a professional-grade flight control developed by Jiyi and developed for industrial applications.

Rubycon 1000uF 35v 105c Capacitor

49.00
Brand Name Rubycon Item Shape Round Maximum Voltage 35 volts Model Number ZLH Number of Items 6 Operating Voltage 35

Rubycon UPL 50V 470uf 10x22mm Capacitor

79.00
In our FPV hobby, capacitors are becoming an essential component due to high power motors and noisy electronics. Don’t forget