Showing all 8 results

Happymodel 2.4GHz ExpressLRS ES24TX Slim Pro TX module for X-lite Tango2/Pro

3,999
This Slim Pro TX module is designed by Happymodel and based on the open source- ExpressLRS which is a very

Happymodel ExpressLRS ES24TX 2.4GHz Micro TX Module

2,399
This Micro TX is designed by Happymodel and based on the open-source ExpressLRS which is a very popular low latency and high re-flashed rate RF module for RC Airplane and FPV Racing. Its main hardware architecture is ESP32, ESP8285, and the SX1280 RF chip. The ES24TX module is a complete solution that is plug and play and already pre-loaded with Expresslrs firmware.

Happymodel ExpressLRS ES900RX Receiver Module

1,599
The ES915RX module is a long-distance 915mhz wireless receiver developed and designed based on the open-source ExpressLRS software. This module is characterized by ultra-long-range, stable operation, and low latency. It is compatible with most Opentx remote controllers, especially suitable for Radiomaster TX16S and Jumper T12, T16, and T18 series remote controllers, and are basically plug and play.

Happymodel ExpressLRS ES900TX + ES900RX Long Range Combo

4,699
The ES900TX and ES900RX modules sets are long-distance 915mhz or 868mhz wireless transmission equipment developed and designed based on the open-source ExpressLRS software. This set of modules is characterized by ultra-long-range, stable operation, and low latency. They are compatible with most Opentx remote controllers.

Happymodel ExpressLRS ES900TX Transmitter Module

3,399
The ES915TX module is a long-distance 915mhz wireless transmission developed and designed based on the ExpressLRS open-source software. The ES915TX is characterized by ultra-long-range, stable operation, and low latency. This module is compatible with most Opentx remote controllers, especially suitable for Radiomaster TX16S and Jumper T12, T16, and T18 series remote controllers - basically plug and play. The heat sink has been specially customized for the transmitter module, which can help the transmitter to operate stably under high-power conditions.

Happymodel ExpressLRS Nano 2.4GHz EP1 RX

1,149
The Happymodel 2.4GHz ELRS nano series receiver has an open-source program based on ExpressLRS. Due to the low-latency and high-refresh-rate RF module, they are very comfortable for FPV Racing and Long Range FPV. These are very suitable for Tiny whoops because of the ultra-light and Nano size!

Happymodel ExpressLRS Nano 2.4GHz EP2 RX

1,149
The Happymodel 2.4GHz ELRS nano series receiver has an open-source program based on ExpressLRS.