Showing 1–12 of 25 results

FlyWoo GOKU 506S 50A BLheli_S 2-6S ESC (30.5×30.5)

4,799.00
GOKU 506S 8bit 50A ESC Con. Current: 50A Burst Current: 55A ( 10 Seconds) Input Voltage: 2-6S Support DShot300/600 Current

FlyWoo GOKU G45M 32BIT 128K 2-6S 45A ESC (20×20)

5,199.00
The GOKU G45M is a high-performance ESC with a 45A continuous current rating and 32-bit processing speed. It features AM32

Foxeer Reaper F4 128K 65A BL32 4in1 9~40V ESC 30.5*30.5mm M3

8,999.00
Firmware FOXEER_Reaper4IN1_F4_65A_128_Multi_32_9 Continuous /Burst Current 65A*4 / 100A*4 Input Voltage DC 9V~40V (3-8S Lipo) BEC No Telemetry Supported ESC Programming

Foxeer Reaper F4 Mini 128K 45A BL32 4in1 ESC 20*20mm M3

5,499.00
Firmware FOXEER_ReaperM4IN1_F4_45A_128_Multi_32_9 Continuous /Burst Current 45A*4 / 65A*4 Input Voltage DC 10V~26.2V (3-6S Lipo) BEC No Telemetry Supported ESC Programming

GEPRC GEP-BLS60A-4IN1 ESC

4,999.00
Specifications Input Voltage:3-6S Lipo Galvanometer:Support Continuous Current:60A Burst Current:65A(5 seconds) Support Protocol:Dshot 150/300/600 Size:42.9×39.7mm, hole30.5×30.5mm,φ4mm hole becomes φ3mm after using

GEPRC TAKER F722 BL32 E55A SE STACK

8,999.00
  Summary The GEPRC TAKER F722 E55A SE stack is a high-performance stack system aimed at racing. It adopts the

GEPRC TAKER H70_96K BL32 4IN1 ESC 70A

9,599.00
Specifications Input Voltage:3-6S Lipo Galvanometer:Support PWM frequency: 24~96K Continue Current:70A Burst Current:80A(5 second) Support Protocol:Dshot 150/300/600 Size:42.6*42.1mm,hole30.5×30.5mm,φ4mm hole becomes φ3mm

HGLRC SPECTER 60A 4in1 ESC 3-6S BL32 128K with Heat Sink for FPV Racing Drone Freestyle

7,999.00
ESC Features: 1. The high-performance hardware adopts STM32G071 BL32 processor, which has fast computing speed, smoother control, better hand feel,

HGLRC SPECTER 60A 8Bit 2-6S 30×30 4in1 ESC

3,799.00
Features Blheli_S firmware can be replaced with Bluejay firmware to make RPM filters available. 2S capable Is capable of supporting

HobbyWing Skywalker 2-4S 50A UBEC Brushless ESC w/ 5V/5A BEC

1,499.00
  1. Output: Continuous 50A
  2. Burst 65A up to 10 seconds.
  3. Input Voltage: 2-4S Lipo, 5-12 cells N
  4. BEC: 5A / 5V Switch mode BEC.
  5. The refresh the rate of the throttle signal: 50Hz to 432

Holybro Tekko32 F4 4in1 50A ESC

7,199.00
  1. Continuous Current 50A x4
  2. Burst Current 60A x4
  3. Supports 4-6S battery
  4. Supports DShot 150/300/600/1200 & MultiShot/OneShot/Proshot/PWM etc.
  5. ESC telemetry Supported

HolyBro Tekko32 F4 4in1 Mini 50A ESC

6,799.00
Features: All new High-quality MOSFETs with low internal resistance & heat generation, and individual metal heatsink New and faster F4 MCU @ 150Mhz (compared to F3 @108Mhz & F0 @48Mhz) Separate drive & control circuit, reducing the electrical interference to the control circuit Specification: Continuous Current: 50A x4