Showing 1–36 of 142 results

Emlid Reach M2 RTK GNSS Receiver

71,390.00

Multi-band RTK GNSS receiver with centimeter precision

For surveying, mapping and navigation. Comes with a mobile app Baseline up to 100 km Update rate 10 Hz

Emlid RS2 GNSS Receiver – Base

233,640.00

Multi-band RTK GNSS receiver with centimeter precision

For surveying, mapping and navigation. Comes with a mobile app Baseline up to 100 km Update rate 10 Hz

Emlid RS3 GNSS Receiver – Base

237,299.00
Multi-band RTK GNSS receiver with tilt compensation
Survey grade precision even in hard-to-reach spots. Comes with a mobile app.
IMU
6DOF, RTK + 2 mm + 0.3 mm/°
GNSS
GPS/QZSS L1C/A, L2C, GLONASS L1OF, L2OF, BeiDou B1I, B2I, Galileo E1-B/C, E5b
18 hrs with tilt compensation
Li-Ion battery, USB Type-C charging
LTE and Wi-Fi
To connect the device to the internet
Dual-band radio
868/915 MHz LoRa to receive and transmit corrections 450 MHz UHF to receive corrections
NTRIP and RTCM3
Supported protocols to send and receive corrections
Package includes
– Reach RS3 – Carrying case with a strap – Radio antenna – USB Type-C cable

Foxeer H7 Mini MPU6000 FC 8S Dual BEC Barometer

10,999.00
Model Foxeer H7 CPU STM32H743 Gyro MPU6000 Barometer DPS310 Power Supply 4~8S Lipo BEC Output DC5V/2A; DC10V/2A OSD BF OSD

Foxeer Reaper 80A F4 128K BL32 4-8S Single ESC

6,299.00
Firmware FOXEER_Reaper_F4_80A_128_Multi_32_9 Continuous /Burst Current 80A/ 145A Peak Power Rating (kW) 4 Continuous Rating Duration (s) 65 Burst Rating Time

GEPRC GEP-F411-35A AIO (F411 FC 35A 2-6S 8bits BLS ESC 25.5mm)

8,099.00
GEP-F4-35A is developed on the basis of GEP-F4-20A. It can handle 35A continuous current and (40A burst), totally supports the

GEPRC GEP-F722-35A AIO

7,999.00
  • Model Name:GEP-F722-35A AIO
  • MCU:STM32F722
  • IMU:BMI270/42688 gyro/accelerometer(SPI)
  • OSD:Betaflight OSD w/ AT7456Ev
  • BEC output:5V@1A
  • Intergrated LC Filter
  • ESC MCU:BB21F16G
  • Continuous current:35A
  • Input:2~6S
  • Supports:Dshot600,Oneshot,Multishot
  • Size:32x32mm Board
  • Mounting Hole:25.5×25.5mm
  • Weight:8.8g

GEPRC GEP-F722-45A AIO V2

10,499.00
  • Model Name: GEP-F722-45A AIO V2
  • MCU: STM32F722
  • IMU: 42688 gyro/accelerometer(SPI)
  • OSD: Betaflight OSD w/ AT7456Ev
  • UART Ports: R1 T1 / R2 T2 / R3 T3 / R4 T4 / R5 T5
  • BEC output: 5V@1A
  • Intergrated LC Filter
  • ESC MCU: 8BB21F16G
  • Continuous current: 45A
  • Input: 2~6S
  • Support: Dshot600,Oneshot,Multishot
  • Size: 32x32mm Board
  • Mounting Hole: 25.5×25.5mm
  • Weight: 8.8g

GEPRC GEP-F722-HD V2 Flight Controller

3,599.00
Specifications MCU:STM32F722 IMU:ICM42688-P(SPI) Air Unit Connection:Direct plugging into DJI Air Unit Black Box:16M onboard USB Interface:Type-C OSD:BetaFlight OSD w/ AT7456E

GEPRC GEP-M10 Series GPS Module

1,649.002,149.00
Summary Hello all FPV enthusiasts, in order to improve customer experience, the GEPRC team has fully upgraded the GPS series

GEPRC GEP-M1025 Series GPS Module

2,099.003,299.00
  Summary The GEPRC GPS series product line has been fully upgraded. The GEP-M1025 series of GPS products based on

GEPRC GEP-TAKER F411-12A-E 1~2S AIO

6,099.00
Summary TAKER F411-12A-E 1~2S AIO is a lightweight and highly integrated flight control system, weighing only 4.2g. It is suitable

GEPRC SPAN F722-BT-HD V2 Flight Controller

7,699.00
The SPAN F722-BT-HD v2 flight controller supports direct plug-in the DJI Air Unit, which can save the trouble of soldering. The upgrade

GEPRC SPAN F722-BT-HD V2 Stack

15,299.00
Summary The SPAN F722-BT-HD v2 stack is specially designed for DJI Air Unit, plug and play, is a flight tower system

GEPRC TAKER F405 BLS 50A Stack

6,199.00
Summary GEPRC TAKER F405 BLS 50A STACK is a plug-and-play stack system specially designed for DJI Air Unit. Use STM32F405

GEPRC TAKER F411 8Bit 12A AIO Built-in ELRS

6,999.00
Summary Brand new TAKER F411 8Bit 12A AIO adds new blood to the MINI FPV, the weight of the AIO

GEPRC TAKER F722 BL32 70A STACK

12,399.00
Summary GEPRC TAKER F722 BL32 70A STACK is a plug-and-play flying tower system specially designed for DJI Air Unit.Use STM32F722

GEPRC TAKER F722 BLS 60A STACK

8,099.00
Summary GEPRC TAKER F722 BLS 60A STACK is a plug-and-play flying tower system specially designed for DJI Air Unit.Use STM32F722

GEPRC TAKER H70_96K BL32 4IN1 ESC 70A

9,599.00
Specifications Input Voltage:3-6S Lipo Galvanometer:Support PWM frequency: 24~96K Continue Current:70A Burst Current:80A(5 second) Support Protocol:Dshot 150/300/600 Size:42.6*42.1mm,hole30.5×30.5mm,φ4mm hole becomes φ3mm

GEPRC Type C USB Adapter Board

349.00
Specification: Brand Name: GEPRC Item Name: Type C USB Adapter Board Application: Only for DJI Air Unit Module to adjust

HAOYERC ESC LED Extension Race Wire (2Pc)

299.00
A simple ESC LED Race Wire with a multi-colour option is available.   Includes: 2x LED Board  

Happymodel Diamond F4 FR 5-in-1 AIO Flight Controller w/ Built-In ESC, VTX, Receiver – SPI Frsky

6,199.00
This 5-in-1 flight controller is inspired by Happymodel's Official Pilot - Angry Don FPV! The Happymodel DiamondF4 AIO 5-IN-1 Flight controller has a built-in VTX ESC OSD Receiver.

HappyModel X12 AIO 5 in 1 Flight Controller built-in 12A ESC and OPENVTX Support 1-2S

7,499.00
The Happymodel X12 is a 5-in-1 AIO board featuring an F4 Flight Controller, onbard 12A 4-in-1 ESC, 5.8GHz OpenVTX, and three different receiver options: PNP, FrSky, or ELRS. This AIO is great for brushless whoops with its great RX an VTX range!

HEX Here 3+ GPS M8P With i-Stand with CAN

25,349.00
Features Cost-effective high precision positioning, L1 band RTK support with centimeter level positioning accuracy. Brand New Design: Excellent visibility on

HEX HERE+ RTK BASE(M8P)

15,199.00
Here 3 RTK Base (M8P Chip)-(Originally called Here+ RTK base) Here 3 RTK Base Centimeter accuracy for surveying, mapping and

HEX Here4 Multiband RTK GNSS GPS Module

25,349.00
HEX Here4 Multiband RTK GNSS GPS Module
The Here 4 is a professional High Precision Dual-band RTK Navigation module.

HEX HerePro without iStand

79,999.00
HerePro is a professional High Precision Multi-band RTK Navigation module. It supports various GNSS options such as BeiDou, Galileo, GLONASS, GPS, QZSS. Connecting 2 HerePro modules, as base and rover respectively, can complete a precise Multi-band Multi-GNSS RTK system. The HerePro rover and base are identical in both software and hardware. Parameter setting is the only distinction. HerePro uses multi-frequency DGNSS signals with advanced algorithms to converge on an RTK Fix in seconds, achieving more reliable centimeter level positioning.

HGLRC 30A 3-5S Dshot600 BLHeli_S 16.5 BB2 ESC for RC Drone

1,199.00
HGLRC 30A 30amp 3-5S Dshot600 Ready ESC BLHeli_S 16.5 BB2 Supports Dshot for RC Drone FPV Racing HGLRC 30A Dshot600

HGLRC Amass XT30 Current Sensor

499.00
HGLRC AMASS XT30 CURRENT SENSOR   Specification: AMASS XT30 CURRENT SENSOR Voltage: 4S(16.8V) Current Max :80A Weight :3.3g

HGLRC Amass XT60 Current Sensor

599.00
HGLRC AMASS XT60 CURRENT SENSOR Specification: AMASS XT60 CURRENT SENSOR Voltage: 6S(25.2V) Current Max:120A Weight:6.8g

HGLRC LED ARM C232B For ESC Motors

449.00
HGLRC LED ARM C232B For ESC Motors Support voltage:2-6S Color:Red/Green/Blue/Yellow Quantity:4 PCS Overcurrent:15A Size:13x5mm Weight:1.2g(4 pcs) Package Included: 4x C232B

HGLRC LED Lite (25mm)

599.00
After the HGLRC W554B LED light bar has been the best-selling model aircraft for many years, this time HGLRC brings

HGLRC LED MINI Controller

699.00
After the HGLRC W2812 LED Controller has been the best-selling model aircraft for many years, this time HGLRC brings you

HGLRC Specter 40A AIO 4-6S MPU6000

7,949.00
Hglrc Specter 40A 4-6S AIO The flight controller is equipped with STM32 F722 main control and MPU6000 gyroscope, camera, receiver,

HGLRC SPECTER 60A 4in1 ESC 3-6S BL32 128K with Heat Sink for FPV Racing Drone Freestyle

7,999.00
ESC Features: 1. The high-performance hardware adopts STM32G071 BL32 processor, which has fast computing speed, smoother control, better hand feel,

HGLRC Specter F405 Flight Controller

3,499.00
HGLRC Specter F405 is an affordable flight controller suitable for freestyle and racing drones. The controller is based on the