The ToolkitRC M7 has been reinvented and is better than ever!
This charger is equipped with a full-color IPS LCD screen that is easily navigatable with its smooth roller selector. The M7 AC is the same size as its predecessor and is 33% more powerful with a max output of 200W and 15A! Now including ToolkitRC’s dual sliding connector doors which allow you to switch from XT30 to XT60 in a flash!!
Features
- Battery Charger
- Cell Checker
- Servo Tester
- PWM, PPM.SBUS Input/output & Receiver tester
- Viable AMP/volt DC Power supply (Required external DC input
- Lithium battery cut-off voltage can be set (TVC function)
- Measure battery voltage, internal resistance, balance
- Measure PWM / PPM / xBUS signal values, Accuracy 1ms
- Output PWM / PPM / xBUS standard signal, Accuracy 1ms
- Customizable 1-28V constant voltage, 1-10A constant current
- Charge the drone battery, activate and charge.
- Multi-language optional
- USB 2.1A@5.0V Output,for Mobile devices
Specifications
- LCD: IPS 2.0inch
- LCD: 320*240 Pixel
- Input voltage: 7.0-28.0V @MAX 12A
- Input voltage: AC 100-240V MAX 100W 1.5A
- Type of battery:
- Lipo LiHV LiFe Lion@1-6
- NiMh @1-16S Pb @1-10S
- Balance current: 400mA @2-6S
- Charger power:
- 200W @MAX 15A
- Discharge power:
- 200W @MAX 10A Recycle mode
- 10W@3A Normal mode
- USB: 2.1A @5.0V or Upgrade
- Product size: 112×72*38 mm
- Product weight: 245g
- Pack size: 144x73x38mm
- Pack weight: 380g
Input
- PWM: 880-2200us @20-400Hz
- PPM: 880-2200us*8CH @20-50Hz
- SBUS: 880-2200us*16CH @20-100Hz
- Voltage: 1.0-5.0V @1-6S
- Internal resistance: 1-99mR @1-6S
- ESC: 200W@10A PWM Output
Output
- PWM: 500-2500us @20-1000Hz
- PPM: 880-2200us*8CH @20-50Hz
- SBUS: 880-2200us*16CH @20-100Hz
- Power supply: 1.0-28.0V @1.0-10A mode:CC+CV
- OverCurrent Cutoff time: <5ms
Includes
- 1x ToolKitRC M7 200W 10A 1-6S DC Smart Charger & Diagnostic Tool
Reviews
There are no reviews yet.