Showing 97–108 of 163 results

MATEKSYS PM12S-3 Power Module

5,499.00
The MATEKSYS PM12S-3 Power Module features 9-55V DC IN (3-12S LiPo), 3x independent Step-Down Voltage Regulators and BEC 5V, 4A continuous, 6A Peak, BEC 12V 4A continuous, 6A Peak and BEC Vx, 5.25V/6V/8V options, 15A cont., 25A Peak 1K:20K voltage divider built-in (Volt 1/21 Input voltage).

Mauch 001: PL050 – 50A Sensor Board

3,899.00
50A – Current / Voltage measurement sensor board, based on Allegro Hall Sensor ACS758-050U. Voltage range is up to 14S

Mauch 002: PL-100 Sensor Board

4,299.00
100A – Current / Voltage measurement sensor board, based on Allegro Hall Sensor ACS758-100U. Voltage range is up to 20S

MicoAir 4IN1 33A/50A/60A BLUEJAY ESC

4,299.006,899.00
Bluejay-4IN1-60A Firmware: Bluejay_0.19.2_JH40 PWM Freq: 48KHz ESC Protocol: DShot300/600 Power Input: 3-6S LiPo Continuous Current: 60A * 4 MOSFET RDS(on): 0.75mR

MicoAir H743 Flight Controller Supports Ardupilot/PX4/INAV/Betaflight

7,499.0011,999.00

High performance H743 Flight controller, with dual IMU and compass sensor built-in, supports Ardupilot/PX4/INAV/Betaflight

MicoAir LR900-F/P 915MHz 30KM Long-Range LoRa Telemetry Module Pair

8,699.008,999.00

30km/50km or more, provide a reliable point-to-point bidirectional communication link for drones, boats, and RTK devices.

MicoAir M10G-5883 M10 GPS with Compass QMC5883L Module

1,699.00
Introduction M10G-5883 GNSS module integrates the u-blox 10th generation receiver chip – M10050, and the magnetic sensor – QMC5883L. It supports all

MicoAir MG-F10 Dual Band GNSS Module

7,399.00
MG-F10 – GPS – MicoAir Tech Specifications GNSS Receiver: UBLOX NEO-F10N Compass: IST8310 GNSS Band Support: L1 (1575.42MHz) / L5

MicoAir MT-01P LiDAR Range Sensor

2,199.00
Specifications Output Mode: UART 115200; I2C 400K Output Interface: LVTTL (3.3V) Protocol: Micolink/Mavlink/MSP Output Rate: 800-5Hz (50Hz default) Firmware Supported:

MicoAir MT-06 Optical Distance Sensor TOF – 6M

1,199.00
6m ToF Range Sensor, Super mini, outdoor available supports Ardupilot/PX4/INAV

MicoAir MTF-01 Optical Flow & LIDAR for Ardupilot/PX4/INAV

2,999.00
Description MTF-01 is an optical flow ranging integrated sensor developed by MicoAir Technology. It uses uart to output data and

MicoAir MTF-01P Optical Flow&Range Sensor

3,899.00
You’ll achieve greater accuracy in navigation with our MTF-01P Optical flow & 12m Range 2IN1 Sensor, thanks to its advanced technology and 12 meter range. Make smarter decisions and stay in control with our optical sensor solution.