RECENT PRODUCTS

GEPRC 1.2GHz Antenna

599.00
This is a spare antenna for the GEPRC Maten 1.2G VTx but can basically be used for any Video Transmitter

GEPRC Momoda 5.8G Antenna Long Version

699.00
Introduction: GEPRC Momoda antenna is a 5.8G optimized antenna for quad. The antenna has good gain performance and is very

GEPRC TAKER F722 BL32 E55A SE STACK

8,999.00
  Summary The GEPRC TAKER F722 E55A SE stack is a high-performance stack system aimed at racing. It adopts the

GEPRC TAKER F722 SE Flight Controller

4,399.00
Specifications Model: TAKER F722 SE FC MCU: STM32F722RET6 IMU: MPU6000 Black Box: 32Mb Flash USB: Type-C OSD: BetaFlight OSD w/

GEPRC TAKER E55_96K BL32 4IN1 ESC 55A

5,249.00
Specifications Model:TAKER E55_96K BL32 4IN1 ESC 55A Input Voltage:7.4V-25.2V(LiPo 2-6S) Galvanometer:Support PWM refresh frenquency: 24K-96K Continuous Current:55A Burst Current:60A (5s)

GEPRC GEP-BLS60A-4IN1 ESC

4,999.00
Specifications Input Voltage:3-6S Lipo Galvanometer:Support Continuous Current:60A Burst Current:65A(5 seconds) Support Protocol:Dshot 150/300/600 Size:42.9×39.7mm, hole30.5×30.5mm,φ4mm hole becomes φ3mm after using

GEPRC ELRS Nano 915M V2 Receiver

1,499.00
Summary GEPRC ELRS Nano 915M V2 Receiver is a new generation receiver system based on ExpressLRS open source project.ExpressLRS features

GEPRC 1.2G VTX Filter

999.00
Summary Due to the wide working frequency and poor filtering effect on most common 1.2-1.3G image transmission receivers, the video

GEPRC GEP-Camera Damping Ball (6pc)

399.00
Summary GEP-Camera damping ball is a shock-absorbing damping ball specially designed for camera gimbal equipment.In order to solve the vibration

GEPRC ELRS Nano 915M PA500 Receiver

2,099.00
Summary The GEPRC ELRS Nano 915M PA500 receiver is an advanced reception system based on the ExpressLRS open-source project. ExpressLRS

HolyBro SiK Telemetry Radio V3

6,799.00
Overview This Holybro SiK Telemetry Radio is a small, light and inexpensive open source radio platform that typically allows ranges

HolyBro S500 V2 Frame Kit

4,499.00
  1. Product: Holybro S500 V2 Frame Kit
  2. Dimensions:383*385*240mm
  3. Wheelbase:480mm
  4. Weight:782g
 

GEPRC RAD Tiny 5.8G 400mW VTX

Summary GEPRC RAD Tiny 5.8G 400mW VTX is compact and lightweight and can fit into tight spaces. It weighs only

GEPRC MATEN 1.2G 2W VTX

4,999.00
Summary The MATEN 1.2G 2W VTX high-power image transmission newly developed by the GEPRC team is now officially released.   Its performance

GEPRC GEP-MK5D-LR7 Frame

8,999.00
Summary MK5D-LR7 is a 7-inch model upgraded on the basis of the MARK5.The strength of the arm structure is optimized,

GEPRC GEP-DS20 Frame

1,199.00
Summary GEP-DS20 is a 2-inch lightweight frame compatible with O3 Air Unit, Link and analog video transmission. It is injection

GEPRC GEP-MARK4 HD7 DJI FPV Freestyle Frame kits

3,499.00
Features: The perfect match DJI FPV Air Unit Upgraded size of hole, 16mmx16mm & 19mmx19mm both feasible 3D printing parts

GEPRC GEP-Mark4-10 Frame

4,999.00
Summary GEP-Mark-10 is a frame designed to manage heavy-loads flights. It can carries a maximum payload of 3kg when applied

GEPRC GEP-EF10 Frame 10″ Long Range

8,199.00
Feature  The newly designed EF series has a strong and durable structure.  High-strength 7mm drone arm and 3.5mm stiffener bar

GEPRC GEP-Tern-LR40 Frame

3,799.00
Summary The Tern-LR40 frame is specially designed for the 4-inch long-range FPV drone. Adopting a well-designed DC shape structure, after

GEPRC GEP-DoMain3.6 Frame

5,799.00
Summary The DoMain 3.6 frame developed by GEPRC for freestyle and aerial shooting is now officially released. The frame is

GEPRC GEP-CT25 Frame

3,999.00
Summary The GEP-CT25 frame adopts the avant-garde design and is injection molded with advanced material, taking into account the outstanding

HQProp D2*1.9*4GR-PC Properller

299.00
Specifications Model:HQ Prop D2*1.9*4GR-PC Properller Propeller Diameter:2 inch Pitch :1.5 Blades : 4 Material : Poly Carbonate Weight :0.6 g

HQProp T4X2.5 Grey (2CW+2CCW)-Poly Carbonate

349.00
Propeller Diameter: 4 inch Pitch : 2.5 Blades : 2 Material : Poly Carbonate Weight :1.45g Hub Diameter : 9.8mm

HQProp DT63MMX4 Light Grey (2CW+2CCW)-Poly Carbonate

299.00
Propeller Diameter: 63MM Pitch : 1.5 Blades : 4 Material : Poly Carbonate Weight :1.28g Hub Diameter : 10.1mm Hub

GEPRC MATEN 5.8G 2.5W VTX PRO

6,999.00
Summary The MATEN 5.8G 2.5W VTX PRO high-power image transmission newly developed by the GEPRC team is now officially released.

GEPRC GEP-DoMain 3.6 Frame Parts

299.00399.00
Suitable Model: GEP-DoMain 3.6 Frame  DoMain Series

GEPRC GEP-MOZ7 Frame Parts

799.001,299.00
Suitable Model: GEP-MOZ7 Frame MOZ7

GEPRC GEP-CL25 V2 Frame Parts

1,199.001,499.00
Suitable Model: GEP-CL25 V2 Frame CineLog25 V2   Propeller Guard is 2pc per pack

GEPRC GEP-Racer Frame Parts

149.00449.00
Suitable Model: GEP-Racer Frame Racer

iFlight Defender Drone Sling Bag

2,499.00
Description Introducing our Sling Bag designed specifically for the Defender series drone. Conveniently carry all your essential flying gear wherever

iFlight Mach R5 Sport LED Set

1,399.00
Description Introducing our Tiny LED Kit specifically designed for the Mach R5 Sport Analog. Easy to install and ready to

iFlight BLITZ H7 Pro Flight Controller

6,999.00
Description Introducing the BLITZ H7 Pro Flight Controller – a powerhouse with a dual-sided shielding design that not only protects

iFlight BLITZ Mini F7 V1.2 Flight Controller

4,999.00
Features Improved circuit design, better components and lower electrical noise! DJI HD VTX Connector (Plug-and-Play / No soldering required) FC

SEQURE S20 Nano Electric Soldering Iron w/ C115 Tip

3,899.00
Product Description: – Compatible with C115 series soldering iron tips, temperature adjustable range 50℃-500℃/122℉-932℉. – Working power supply: Support PD2.0/3.0,

SEQURE S99 Soldering Iron w/ C245 Tip

2,799.00
S99 Product Description: – Compatible with C245 series soldering iron tips, temperature adjustable range 50℃-500℃/122℉-932℉. – Working power supply: support

SEQURE XT60 to Type-C Power Cable

499.00
DO NOT USE THIS TO CONNECT A LIPO TO YOUR PHONE/LAPTOP OR ANY OTHER USB-C DEVICE. (Unless of course you

CP2112 debug board USB to I2C Communication Module

699.00
  1. On-chip power-on reset circuit, on-chip voltage regulator: 3.45 V output
  2. Compliant with USB specification 2.0 standard; full speed (12Mbps)
  3. USB suspend status via SUSPEND and /SUSPEND pins
  4. Integrated 194-byte one-time programmable ROM for storing customizable product information

SEQURE 99 Soldering Iron Tips S99-B1/S99-BC2/S99-I/S99-K

599.00
Product Description: S99 soldering iron tips have 4 types of tips, Conical tip (B1), Horseshoe Shape tip (BC2), Straight Pointed

SEQURE S20 Soldering Iron Tips S20-K/S20-I/S20-IS

699.00
Product Description: S20 soldering iron tips have 3 types of tips, Knife tip (K), Straight tip (I), curved tip (IS),

SEQURE TVA3006 High Precision Volt-Ammeter Power Meter Type-C/A

1,299.00
Product Description: (1) Supports test voltage from DC4.5V to DC30V, current from 0A to 15A. (2) Detects bidirectional current. Supports

SEQURE M10-12/M10-18/M10-25Q GPS Module

1,499.001,699.00
Product Description: (1) Adopts 10th generation chip to design the u-blox output protocol and 10Hz output frequency, lower power consumption,

SEQURE T55 Smart Mini Constant Temp Adjustable Preheating Desoldering Station

2,499.00
Product Description: – Adjustable heating temperature range from 50℃ to 280℃/122℉ to 536℉. – Adopts heat resistant ceramic temperature sensor,

iFlight Smart Smoke Stopper – XT90

999.00
Description A smoke stopper can help avoid damage when you power on a mini quad drone for the first time.

iFlight Albatross V2 5.8GHz Antenna – UFL

699.00
Compatibility LHCP 65mm: Mach R5 Sport HD 170mm: Protek35 Vista HD RHCP 65mm: Mach R5 Sport Analog 130mm: AOS LR5

iFlight iPex/UFL to M2 RP-SMA F Adapter Cable

249.00
Specifications UFL to M2 RP-SMA Female Adapter Cable Total Length: 80mm/130mm Fit for Helion 10 DRONE and others Packing List

iFlight Woven 200mm LiPo Battery Straps

499.00
Description The Microfiber Rubber Battery Straps is NextGen FPV lipo battery strap which ensures the lipo can’t slip out, even

iFlight Albatross V2 60mm 5.8GHz Antenna

699.00
Description Introducing the new and improved Albatross V2 antenna! With upgraded welding technology and a unique rugged design, this antenna

HQ MacroQuad Prop 10X5X3 Black-Glass Fiber Reinforced Nylon

849.00
Propeller Diameter: 10 inch Pitch : 5 Blades : 3 Material : Glass Fiber Reinforced Nylon Weight : 23.3g Hub

HQProp 6X2.5X3 Light Grey (2CW+2CCW)-Poly Carbonate

349.00
Propeller Diameter: 6 inch Pitch : 2.5 Blades : 3 Material : Poly Carbonate Weight : 5.3g Hub Diameter :13.2mm

iFlight Type-C PD100W Cable

799.00
Features Visible LED wattage display cable, seeing in real-time charging status Specifications Product Name: iFlight PD100W Charger Material: Copper core,

iFlight DJI O3 VTX Heatsink – Centurion

2,999.00
Description DJI O3 air unit Heatsink specially designed for Centurion Improved cooling performance for the high power draw of the