Showing 1–12 of 140 results

Emlid Reach M2 RTK GNSS Receiver

71,390.00

Multi-band RTK GNSS receiver with centimeter precision

For surveying, mapping and navigation. Comes with a mobile app Baseline up to 100 km Update rate 10 Hz

Emlid RS2 GNSS Receiver – Base

233,640.00

Multi-band RTK GNSS receiver with centimeter precision

For surveying, mapping and navigation. Comes with a mobile app Baseline up to 100 km Update rate 10 Hz

Emlid RS3 GNSS Receiver – Base

237,299.00
Multi-band RTK GNSS receiver with tilt compensation
Survey grade precision even in hard-to-reach spots. Comes with a mobile app.
IMU
6DOF, RTK + 2 mm + 0.3 mm/°
GNSS
GPS/QZSS L1C/A, L2C, GLONASS L1OF, L2OF, BeiDou B1I, B2I, Galileo E1-B/C, E5b
18 hrs with tilt compensation
Li-Ion battery, USB Type-C charging
LTE and Wi-Fi
To connect the device to the internet
Dual-band radio
868/915 MHz LoRa to receive and transmit corrections 450 MHz UHF to receive corrections
NTRIP and RTCM3
Supported protocols to send and receive corrections
Package includes
– Reach RS3 – Carrying case with a strap – Radio antenna – USB Type-C cable

Foxeer H7 Mini MPU6000 FC 8S Dual BEC Barometer

10,999.00
Model Foxeer H7 CPU STM32H743 Gyro MPU6000 Barometer DPS310 Power Supply 4~8S Lipo BEC Output DC5V/2A; DC10V/2A OSD BF OSD

Foxeer Reaper 80A F4 128K BL32 4-8S Single ESC

6,299.00
Firmware FOXEER_Reaper_F4_80A_128_Multi_32_9 Continuous /Burst Current 80A/ 145A Peak Power Rating (kW) 4 Continuous Rating Duration (s) 65 Burst Rating Time

GEPRC GEP-F411-35A AIO (F411 FC 35A 2-6S 8bits BLS ESC 25.5mm)

8,099.00
GEP-F4-35A is developed on the basis of GEP-F4-20A. It can handle 35A continuous current and (40A burst), totally supports the

GEPRC GEP-F722-35A AIO

7,999.00
  • Model Name:GEP-F722-35A AIO
  • MCU:STM32F722
  • IMU:BMI270/42688 gyro/accelerometer(SPI)
  • OSD:Betaflight OSD w/ AT7456Ev
  • BEC output:5V@1A
  • Intergrated LC Filter
  • ESC MCU:BB21F16G
  • Continuous current:35A
  • Input:2~6S
  • Supports:Dshot600,Oneshot,Multishot
  • Size:32x32mm Board
  • Mounting Hole:25.5×25.5mm
  • Weight:8.8g

GEPRC GEP-F722-45A AIO V2

10,499.00
  • Model Name: GEP-F722-45A AIO V2
  • MCU: STM32F722
  • IMU: 42688 gyro/accelerometer(SPI)
  • OSD: Betaflight OSD w/ AT7456Ev
  • UART Ports: R1 T1 / R2 T2 / R3 T3 / R4 T4 / R5 T5
  • BEC output: 5V@1A
  • Intergrated LC Filter
  • ESC MCU: 8BB21F16G
  • Continuous current: 45A
  • Input: 2~6S
  • Support: Dshot600,Oneshot,Multishot
  • Size: 32x32mm Board
  • Mounting Hole: 25.5×25.5mm
  • Weight: 8.8g

GEPRC GEP-F722-HD V2 Flight Controller

3,599.00
Specifications MCU:STM32F722 IMU:ICM42688-P(SPI) Air Unit Connection:Direct plugging into DJI Air Unit Black Box:16M onboard USB Interface:Type-C OSD:BetaFlight OSD w/ AT7456E

GEPRC GEP-M10 Series GPS Module

1,649.002,149.00
Summary Hello all FPV enthusiasts, in order to improve customer experience, the GEPRC team has fully upgraded the GPS series

GEPRC GEP-M1025 Series GPS Module

2,099.003,299.00
  Summary The GEPRC GPS series product line has been fully upgraded. The GEP-M1025 series of GPS products based on

GEPRC GEP-TAKER F411-12A-E 1~2S AIO

6,099.00
Summary TAKER F411-12A-E 1~2S AIO is a lightweight and highly integrated flight control system, weighing only 4.2g. It is suitable